Roland Systems Group VC-1-SC

Eigenschaften

Up/Down/Cross Scan Converter to SDI/HDMI with Frame Sync.

The VC-1-SC Video Converter is ideal for live production where you need analog or digital sources to match a certain SDI and/or HDMI video format, aspect ratio, frame rate, or input type. The versatility of this converter to support a variety of configurations for live production and installed application.

• 3G (Level A and B)/HD/SD SDI In/Out
• HDMI In/Out
• RGB/Component In
• Composite In
• HDCP support
• Built-in Frame Synchronizer and Scaler
• Up/Down/Cross, Frame Rate*, I/P, and Aspect Ratio Conversion
• Audio embedding or De-embedding
• PC/Mac Control Application (VC-1 RCS) for deeper level settings control

3G (Level A and B)/HD/SD SDI, HDMI, RGB/Component, and Composite

The Roland VC-1-SC Video Converter is ideal for live production where you need analog or digital sources to match a certain SDI and/or HDMI video format, aspect ratio, frame rate, or input type. The versatility of this converter to support a variety of configurations for live production and installed application make it highly valuable in many applications.

Support for 1080p 3G-SDI

Video signals beyond 1080i can be input and output. The VC-1 series supports both level A and level B 3G-SDI, letting, you connect a wide variety of 3G-SDI equipment. 1080i, 720p, and SD signals are accommodated automatically on connection.

High quality, smart design

The exterior plating is aluminum at 2 millimeters thick. The connectors laid out inside the exterior plates are fastened to the chassis with nuts and bolts. This makes for a heavy-duty specification that can keep the connectors from coming loose even with frequent cable changes, as well as withstanding impact and drops. Every connector has an LED input indicator enabling you to confirm the status of signal transmission at a glance. The series is built for uncompromising reliability that includes accurate operation even over long periods of continuous use thanks to a design featuring exceptional heat-radiating efficiency.

A form factor that accommodates use on-the-go

Cutaway areas in the exterior plate enable you to fasten the unit to tripods or the like using velcro or elastic ties. This makes for convenient placement and setup even during live on-site use.

Support for HDCP HDMI signals

The VC-1 series is compliant with HDCP. For example, the VC-1-DL can take HDCP-applied HDMI input signals, apply frame synchronization or delay, and produce HDCP-applied HDMI output. This allows the VC-1 series to be used in any HDCP-based system with no worries.

Support for workflow combining audio and video

Audio embedding and de-embedding features are provided (channel-selectable) in the VC-1 Series. The audio embedding feature lets you place audio signals from a different source into the video output. For example, when converting an SDI signal to HDMI, you can use the audio embedding feature to output high-quality audio from any of the SDI audio channels. Digital (AES/EBU) input and output are also supported, letting you exchange sound between professional audio equipment with no degradaton in signal. Analog input and output is supported as well making it possible to both monitor and input audio to/from a wide variety of equipment such as an audio console.

Easy configuration with DIP switches or dedicated PC/Mac software app

DIP switches make it simple to accommodate on-site requirements. Change the conversion direction or other settings by simply sliding a DIP switch on the side of the unit. Connection to a computer via USB cable unlocks even greater versatility with advanced settings including a memory location to lock in a favorite configuration. Control and configure multiple VC-1 units at the same time using a USB hub.

Technische Daten

• SDI
  Connector: BNC type x 1 (Combined use with SDI Out Connector)
  Signal Standards: SMPTE 424M (SMPTE 425M-AB), SMPTE 292M, SMPTE 259M-C
• HDMI
  Connector: Type A (19 pins) x 1
  Signal Standard: HDMI HDCP support (When an HDCP-applied signal is input, output from the SDI OUT connector is stopped)
• RGB/Component
  Connector: HD DB-15 type x 1
  Signal Level: 1.0Vp-p (Y signal), 0.7Vp-p (R/G/B/Pb/Pr signals), 5VTTL (H/V signals)
  Impedance: 75 ohms
• Composite
  Connector: BNC type x 1
  Signal Level: 1.0 Vp-p (Y signal), 0.286 V-p (C signal (NTSC)), 0.3 V-p (C signal (PAL))
  Impedance: 75 ohms
• Analog Audio
  Connector: RCA phono type x 1 pair (L/R) (Combined use with Analog Audio Out Connector)
  Input Level: -6dBV
  Maximum Input Level: +6dBV
  Impedance: 22 k ohms
• Reference
  Connector: BNC type x 1
  Impedance: 75 ohm
  Signal Format: Black Burst, Bi-level, Tri-level
• SDI
  Connector: BNC type x 2 (One is Combined with SDI In Connector)
  Signal Standards: SMPTE 424M (SMPTE 425M-AB), SMPTE 292M, SMPTE 259M-C
• HDMI
  Connector: Type A (19 pins) x 1
  Signal Standards: HDMI HDCP support
• Analog Audio
  Connector : RCA phono type x 1 pair (L/R) (Combined use with Analog Audio In Connector)
  Input Level : -6dBV
  Maximum Output Level : +6dBV
  Impedance : 2.2 k ohms
• SDI
  Connector : BNC type x 1 (Combined use with SDI Out Connector)
  Signal Standards : SMPTE 424M (SMPTE 425M-AB), SMPTE 292M, SMPTE 259M-C
  Video Format : 1920x1080/60p/59.94p/50p/30p/29.97p/25p/24p/23.98p/60i/59.94i/50i,1920x1080/30PsF/29.97PsF/25PsF/24PsF/23.98PsF (Conforms to SMPTE 274M) 1280x720/60p/59.94p/50p/30p/29.97p/25p/24p/23.98p (Conforms to SMPTE 296M)
  720x480/59.94i, 720x576/50i (Conforms to ITU-R BT.601-5)
  Color Format : 10 bits YCC 4:2:2
  Audio Format : Linear PCM, 24 bits, 48 kHz, 16 ch (Conforms to SMPTE 299M, SMPTE 272M-C) When frame synchronizer is working, CH 3-8 of HDMI and CH 3-16 of SDI audio output are not available
• HDMI
  Video Format : 1920x1080/60p/59.94p/50p/30p/29.97p/25p/24p/23.98p/60i/59.94i/50i, 1280x720/60p/59.94p/50p/30p/29.97p/25p/24p/23.98p, 720x480/59.94p/59.94i, 720x576/50p/50i (Conforms to CEA-861-E)
  PC Format : 640x480/60/72/75/85Hz, 800x600/56/60/72/75/85Hz, 1024x768/60/70/75/85Hz, 1280x768/60/75/85/Hz, 1360x768/60Hz, 1152x864/75Hz, 1400x900/60/75/85Hz, 1280x960/60/85Hz, 1280x1024/60/75/85Hz, 1400x1050/60/75Hz, 1680x1050/60Hz, 1600x1200/60Hz, 1920x1200/60Hz Reduced blanking (Conforms to VESA DMT Version 1.0 Revision 11)
  Color Format : 10 bits YCC 4:2:2, 8 bits YCC 4:4:4, 8 bits RGB 4:4:4
  Audio Format : Linear PCM, 24 bits, 48 kHz, 8 ch
• RGB/Component
  Video Format : 1920x1080/60p/59.94p/50p/60i/59.94i/50i/24PsF/23.98PsF (Conforms to SMPTE 274M) 1280x720/60p/59.94p/50p (Conforms to SMPTE 296M) 720x480/59.94p/59.94i, 720x576/50p/50i
  PC Format : 640x480/60/72/75/85Hz, 800x600/56/60/72/75/85Hz, 1024x768/60/70/75/85Hz, 1280x768/60/75/85/Hz, 1360x768/60Hz, 1152x864/75Hz, 1400x900/60/75/85Hz, 1280x960/60/85Hz, 1280x1024/60/75/85Hz, 1400x1050/60/75Hz, 1680x1050/60Hz, 600x1200/60Hz, 1920x1200/60Hz Reduced blanking (Conforms to VESA DMT Version 1.0 Revision 11)
• Composite Video Format : NTSC, PAL
• Audio Embed/De-embed 2ch
• Frame Synchronize It works when enter the reference signal. When frame synchronizer is working, CH 3-8 of HDMI and CH 3-16 of SDI audio output are not available.
• Resolution Conversion Selectable Full/LetterBox/Crop/Dot-by-Dot Type
• Frame Rate Conversion Frame Skip/Repeat Type
• USB USB Type B (Hi-Speed USB) x 1
• Power Supply DC 9 V (AC Adaptor)
• Operation Temperature
  +0--+40 degrees Celsius
  +41--+104 degrees Fahrenheit
• Width (W) 150 mm5-15/16 inches
• Depth (D) 130 mm5-1/8 inches
• Height (H) 30 mm1-3/16 inches
• Weight 500 g1 lbs. 2 oz.

Accessories

• AC adaptor
• Power Cord
• Rubber Foot x 4
• Owner's Manual