AJA Dante AV 4K-R

Properties:

The AJA Dante AV 4K-R is an IP video receiver that can deliver video at up to 4K / Ultra HD resolution in high quality, as well as visually lossless, on a 1 GigE network.

. In doing so, the receiver converts video and audio streams to the Dante AV Ultra IP video protocol and JPEG 2000 video codec. This ensures synchronous transmission of audio and video signals between different devices. Of particular note are the ease of use, interoperability, and integrated controls that provide time-aligned and independently routable audio and video streams. The AJA Dante AV 4K-R is compatible with the Dante Controller software. This is used to set up routing of video and audio signals between Dante devices. Additionally, the transmission of audio and video signals in real time via Ethernet is supported.

• IP Video Receiver
• Delivers video at up to 4K / Ultra HD resolution on a 1 GigE network
• High quality and visually lossless
• Converts video and audio streams to Dante AV Ultra IP video protocol and JPEG 2000 video codec
• Synchronous transmission between different devices
• User-friendly and interoperable
• Integrated control
• Compatible with Dante Controller Software
• Transmission of audio and video signals in real time via Ethernet

Technical Specifications:

• Embedded SDI audio (digital - output): 24 bit, 8 channels, 48 kHz PCM24
• Embedded HDMI audio (digital - output): 24 bit, 8 channels, 48 kHz PCM24
• IP Video Input: Dante AV Ultra - Single Video Channel
• IP Audio Input: Dante Audio - up to 8 channels, 24 bit, 48 kHz PCM24
• SRC conversion rate: 1:8 to 8:1
• ASRC latency: 80 samples (1.6 ms, 48 kHz)

Resolution:

• 4K - 4096 x 2160p / 23.98 / 24 / 25 / 29.97 / 30 / 50 / 59.94 / 60
• Ultra HD - 3840 x 2160p / 23.98 / 24 / 25 / 29.97 / 30 / 50 / 59.94 / 60
• HD - 1920 x 1080p / 23.98 / 24 / 25 / 29.97 / 30 / 50 / 59.94 / 60
• HD - 1280 x 720p / 50 / 59.94 / 60
• WUXGA - 1920 x 1200
• UXGA - 1600 x 1200
• SXGA - 1280 x 1024
• XGA - 1024 x 768
• SVGA - 800 x 600
• VGA - 640 x 480
Video formats
• 4K - 4096 x 2160p
• Ultra HD - 3840 x 2160p
• 2K - 2048 x 1080p
• HD - 1920 x 1080p
• HD - 1280 x 720p
VESA formats
• WUXGA - 1920 x 1200
• UXGA - 1600 x 1200
• SXGA - 1280 x 1024
• XGA - 1024 x 768
• SVGA - 800 x 600
• VGA - 640 x 480
• Network interface: Standard 1 GigE Ethernet
• Audio Flow: 8 flows / 8 channels per flow (unicast or mulicast)
• Video Flow: 1 Flow / 1 Channel per Flow ( Unicast or Mulicast)
• Timestamp: hardware timestamping that supports accurate sample playback
• Video codec: optimized implementation of JPEG 2000 codec in FPGA, licensed from IntoPIX; Dante API management interface
• Video resolutions and color depth: Up to 4096 x 2160 60 p; YCbCr 4:2:2 10 bit (SDI) / Up to 4096 x 2160 60 p; RGB 4:4:4 8 bit, YCbCr 4:4:4 8 bit, YCbCr 4:2:2 8 / 10 / 12 bit (HDMI)
• Audio formats: Dante audio over IP
• Bit rate: Up to 700 MB/s
• Video streaming: unicast or multicast
• Copy protection: HDCP 2.2 / HDCP 2.3 for networks
• Latency: 0.5 frames (e.g. latency at 2160p 60 Hz is < 8 ms between encoder and decoder), total latency may increase depending on network configuration
• Bandwidth 1: 4Kp60 10 bit 4:2:2, 500 to 600 MB7s, results may vary depending on network configuration and management settings
• Bandwidth 2: 1080p60 10 bit 4:2:2, 150 to 250 MB/s, results may vary depending on network configuration and management settings
• Front LED indicators: Power, Codec, System, Status, Sync and HDCP
• Software: Dante controller software from Audinate (Windows or Mac)
• Compatibility: Dante Ecosystem Friendly / Compatible with existing Dante-enabled products

Data Links:

Input
• 1x 12 V DC 4-pin XLR, power supply
• 1x Neutrik etherCon RJ45 connector - 1 GigE (Dante AV & POE+)
• 1x Neutrik etherCon RJ45 connector - 1 GigE (For future use)
• 1x DB-9 RS-422 / VISCA Serial port
• 2x USB 2.0 Type A
• 1x USB 2.0 Mini-B host port
• 1x 3.5 mm jack socket for IR
• 1x 12G-SDI BNC, SMPTE 292 (1.5 Gb/s; 424, 425-A (3 Gb/s), 2081, 2082, 352 SDI Metadata supported (YCbCr 4:2:2, 10 bit, two sampling interleaves (2SI) 4K / Ultra HD source mapping))
• 1x HDMI 2.0 Type A (YCbCr 4:4:4 / 4:2:2; RGB 4:4:4, SMPTE or full RGB; 8, 10, 12 bit - 4K / Ultra HD 4:4:4 limited to 8 bit)
• 1x 12G-SDI, BNC (Reference - For future use)
Output
• 2x RCA analog audio output
• 1x 3.5 mm jack socket for IR

General Product Information:

• Dimensions (W x H x D): 222 x 41.91 x 180.09 mm
• Weight: 1.5 kg
• Safe operating temperature: 0 to 40 °C
• Safe storage temperature: -40 to 60 °C
• Relative humidity in operation: 10 to 90 % (non-condensing)
• Operating altitude: < 3000 meters
• Power: 1.5 A maximum 100-240 VAC, 50/60 Hz (input) / 4 A 12 VDC; 12 V DC IN has priority over Ethernet 1 POE+. Ethernet 1 POE+ becomes active a split second after disconnecting 12 V DC IN (output).

Scope of Delivery:

• 1x AJA Dante AV 4K-R

 

Notice:
VESA formats are always RGB 4:4:4 60 8 bit / Only one input can be used at a time. The device will automatically detect the source, or the user can select the input in the software if both SDI and HDMI inputs are connected.

---