Teradek Bolt 6 XT MAX 12G-SDI/HDMI Wireless TX/RX V-Mount

Properties:

The Teradek Bolt 6 XT MAX 12G-SDI/HDMI Wireless TX/RX is a video radio link set consisting of transmitter and receiver for the transmission of image data.

• Transmitter and receiver for the transmission of image data
• Range of approx. 900 meters with clear view
• Extremely low latency during real-time transmission
• Redesigned form factor that is smaller, lighter, cooler, and up to 50% quieter than its Bolt 4K counterpart

Technical Specifications:

• Color: YCbCr 4:2:2 10 bit (SDI), RGB 4:4:4 8 bit (HDMI)
• Color correction: No
• Tx to Rx - Delay: <0.001 sec.
• Input cross conversion: Yes (HDMI to SDI)
• Resolution:
• 4K / 23.98 / 24 / 25 / 29.97 / 30 / 50 / 59.94 / 60
• Full HD - 1920 x 1080p / 23.98 / 24 / 25 / 29.97 / 30 / 50 / 59.94 / 60
• Full HD - 1920 x 1080i / 50 / 59.94 / 60
• HD - 1280 x 720p / 50 / 59.94 / 60
• SD - 480p / 50
• SD - 480i (NTSC)
• SD - 576i (PAL)
• 1080psf / 23.98 / 24 / 25 / 29.97 / 30
• Video compression: Visual lossless
• Audio compression: 48 kHz 24-bit PCM
• Noise suppression: coexistence with WLAN and 5 GHz wireless phones possible, up to six sets can be operated in the same place
• DFS frequencies: 5.270 ~ 5.670 GHz
• Non-DFS frequencies: 5.190 ~ 5.230 GHz, 5.755 ~ 5.795 GHz, 5.945 ~ 6.425 GHz
• Unicast-multicast: connection of up to six receivers and one transmitter
• Range: Up to 900 meters, line of sight
• RF power: 23 dBm EIRP
• Encryption: AES-256, RSA-1024 key exchange
• RF channel selection: Automatic, Manual
• Antennas: 4 external 2dBi antennas (included)
• Bluetooth: 2.4 GHz
• Configuration interfaces: OSD with menu, joystick navigation
• USB function: Upgrade via USB-C, 5-pin locking connector CCU
• SDI auxiliary data support: transfer of metadata, timecode, and start/stop flags from most camera manufacturers
• Audio input: Embedded SDI/HDMI audio input (2 channels)

Data Links:

• 1x 12G-SDI SMPTE 2082-1 standard / 75 Ω, BNC
• 1x HDMI 2.0, type A
• 1x 2-pin connector with locking, 6-28 VDC

• 1x 12G-SDI SMPTE 2082-1 standard / 75 Ω, BNC

• 1x USB, Type C
• 1x 5-pin connector

• 1x 2-pin connector with locking, 6-28 VDC

• 2x 12G-SDI SMPTE 2082-1 standard / 75 Ω, BNC

• 1x USB, Type C
• 1x 5-pin connector

General Product Information:

• Dimensions TX (W x H x D): 91 x 132 x 27 mm
• Dimensions RX (W x H x D): 139 x 112 x 27 mm
• Weight TX: 344 g
• Weight RX: 430 g
• Operating temperature: 0 °C to 40 °C
• Power consumption: 6 to 28 VDC, 2-pin circular connector
• Battery power: 20 watts
• Battery: Optional via dual battery plate from Sony/Canon
• Construction: Milled aluminum (chassis), compliant circuit board
• Mounting: Multiple mounting options with 1/4"-20 and M3 holes

Scope of Delivery:

• 1x Teradek Bolt 6 XT MAX 12G-SDI/HDMI Wireless TX with V-Mount
• 1x Teradek Bolt 6 XT MAX 12G-SDI/HDMI Wireless RX with V-Mount
• 1x Antennenarray
• 2x Bolt 6 XT battery cover plate (front)
• 1x Bolt 4K TX Mounting Bracket
• 1x Tripod adapter 3/8 inch
• 1x Hot shoe adapter
• 4x Flat head screw
• 2x Screw cap AS, M3 x 16 mm
• 1x L-Inbus wrench 2.5 mm size 3-5/8" length
• 2x 2-pin connection to PowerTap - 46 cm cable (bit 118)
• 1x 2-pin connector to 2-pin connector (Alexa) 46 cm cable (bit 718)
• 2x Ultra thin HDMI plug type A (full) - HDMI plug type A (full) 46 cm cable
• 5x RP-SMA female to RP-SMA female, 10 cm cable
• 2x SDI 12G BNC to BNC 46 cm cable
• 1x Teradek Case XL - Bolt XT/4RX and Array Antenna
• 1x Power supply 2-pin connection to 30 W power supply (Int) - 1.82 m cable
• 9x Antenna 2dBi Rigid V 4.9-7.3 GHz RP-SMA
• 1x Wooden Camera - Universal Ultra Arm Monitor Mount (Combo 1/4-20 & 3/8-16, 5 Inch)
• 1x USB 2.0 Type A male to USB Type C male - 1 m cable
• 2x Teradek Bolt 6 XT rear battery cover plate

Important Notice:
The use of the 6 GHz band is restricted in Europe and will only be available later via a free firmware update. Until then, the device can still be used in the 5 GHz band.

• Do you have any questions concerning this product?
• Further products by Teradek