ERECA CAM Racer 4K Set (V-Mount/Neutrik)

Bundle consists of:

• 1x ERECA CAM Racer TX 4K camera unit (transmitter)
• 1x ERECA CAM Racer RX 4K 19" base station unit (receiver)

The CAM Racer is a complete optical fiber transmission solution for camera connection for Outside Broadcast, Studio and Cinema applications. It is composed of a camera dockable transmitter, agnostic to any type or brand of Camera and a 1RU basestation receiver.

With two 12G-SDI and two 3G-SDI channels, the CAM Racer 4K can fit any camera from simple ENG to 4K professional sport devices making it suitable for any environment and ideal for rentals. It delivers 140 Watts to the camera and an automatic battery backup will help the remote powering system if more power is needed suddenly. Signals control and setup is done through internal web server. Most signals are also reported on LED display of each unit. An OLED display gives direct access to optical receiving levels and server IP address. An internal audio mixer allows user to mix between talkback, programs inputs and local audio channels for Eng and Reporter headsets.
Power is supplied via the Neutrik Duo Connector or a V-Mount battery.

Properties ERECA CAM Racer TX 4K:

The transmitter is fitted in a V-mount dockable unit which can be installed on any camera. Red/green tally led are located on top of the unit. A user panel feature LEDs for signal presence/activity, rotary button for volume adjustment and various level settings (sidetone, program1 / program2 listen level) along with push to talk commands.
Cooling of the unit is done by a small and silent fan located at the back of the unit.

• 2x 12G-SDI output
• 3x 3G-/HD-/SD-SDI output
• 1x Bidirectional HD monitoring with BNC & HDMI input (autoswitch) and BNC output
• 2x Bidirectional audio (Line/Mic level/Phantom power)
• 2x Bidirectional Intercom-Talkback headset interface
• 2x Genlock output (composite video / Blackburst / Tri-Level)
• 1x 10/100 Mbit/s ethernet
• 2x RS232/422/485 serial channel
• 1x LANC/RC-V100 input
• 1x Timecode output
• 2x Tally GPIO output
• Vlock adapter at camera side
• Remote power capacity for the camera: 140 W
• Camera control channel supports: Ethernet, RS422 Serial, Canon RC-V100 protocol (Enhanced Lanc)
• Camera synchronization supports: Two composite video signals and one timecode

Properties ERECA CAM Racer RX 4K:

The basestation receiver is integrated in a standard 19” 1RU format. All signals are dispatched on standard connectors and standard pinout at the rear of the chassis. (Web server is on a separate Ethernet port). The front of the chassis is composed of a LED display panel indicating the status of each signals and technical alarms. An Oled display gives direct access to optical receiving levels and server IP address.
The basestation integrates a single mains power supply and two fans for thermal management.

• 2x 12G-SDI input
• 3x 3G-/HD-/SD-SDI input
• 1x Bidirectional HD monitoring with BNC & HDMI input (autoswitch) and BNC output
• 2x Bidirectional audio (Line/Mic level/Phantom power)
• 2x Bidirectional Intercom-Talkback headset interface
• 2x Composite video input
• 1x 10/100 Mbit/s ethernet
• 2x RS232/422/485 serial channel
• 1x LANC/RC-V100 output
• 1x Timecode input
• 2x Tally GPIO input
• Internal web based management server
• Internal power supply: AC 90 - 260 V
• Vlock adapter at camera side
• Remote power capacity for the camera: 140 W
• Camera control channel supports: Ethernet, RS422 Serial, Canon RC-V100 protocol (Enhanced Lanc)
• Camera synchronization supports: Two composite video signals and one timecode