Atomos Shogun 7

Properties:

This 4K DCI recorder with integrated 7.2" monitor is ideal for use with cameras with SDI and/or HDMI output, which do not provide a touch display. It captures the signals directly from the sensor. The recording is made on affordable 2.5" HDDs or SSDs in Apple ProRes RAW, ProRes, CinemaDNG or Avid DNxHD codec. The Shogun 7 provides a touch display for making the settings and monitor the recorded signals. Start and stop of the recording can be triggered from the camera.

• Housing made of robust ABS polycarbonate
• 7.2" Dynamic AtomHDR zoned backlight IPS LCD panel display with touchscreen
• Aspect ratio: 16:9 native
• Touchscreen resolution: 1920x1280 pixels
• Pixel density: 325 ppi (pixel per inch)
• Colour standard: REC709 HDTV, BT.2020 etc.
• Recording in 8 or 10 Bit 4:2:2 in various codecs (uncompressed)
• Recording to 2.5" HDDs/SSDs in an Atomos Master Caddy II (list of certified storage media)
• Start and stop of the recording with timecode synchronisation can be triggered from the camera via the SDI or HDMI cable
• Bypassing of the 30 minutes limitation of video clips on many DSLR cameras
• Operation with battery or power supply unit (Atomos 12V-3A AC Adaptor)
• 2 battery slots for NP-F batteries
• Batteries can be swapped during operation (hot-swap), if the Atomos Power Station Video (ATOMPWS002) is used
• Input signals (SDI/HDMI) are looped through steadily to the dedicated output
• Remote control via LANC jack
• 3D Look Up Table support (.cube format)

Compatible storage media:

• 2.5" HDD (5.400 - 7.200 rotations per minute)
• 2.5" SSD

Video resolutions and frame rates:

Sony NEX-FS700, PXW-FS5, PXW-FS7, PXW-FS7 II (possibly XDCA-FS7 for RAW output is required):

• 4K DCI: 4096x2160 progressive at 24 / 25 / 30 / 50 / 60 fps
• 2K: 2048x1080 progressive at 24 / 25 / 30 / 50 / 60 / 100 / 120 / 200 / 240 fps

Canon EOS C300 MARK II/EOS C500:

• 4K DCI: 4096x2160 progressive at 24 / 25 / 30 fps
• Ultra HD: 3840x2160 progressive at 24 / 25 / 30 fps

Panasonic VariCam LT, AU-EVA1:

• 5,7K DCI: 5720x3016 progressive at 24 / 25 / 30 fps (AU-EVA1 ProRes RAW only)
• 4K DCI: 4096x2160 progressive at 24 / 25 / 30 / 50 / 60 fps
• Ultra HD: 3840x2160 progressive at 24 / 25 / 30 / 50 / 60 fps
• 2K: 2048x1080 progressive at 24 / 25 / 30 / 50 / 60 / 100 / 120 / 200 / 240 fps

Supported base resolution and frame rates:

• 4K DCI (4096x2160), Ultra HD (3840x2160), 2K DCI (2048x1080), HD (1920x1080): progressive at 23.98 / 29.97 / 59.94 fps

Supported recording/playback formats:

Video:

• ProRes RAW
• ProRes
• CinemaDNG (up to 30p only)
• Avid DNxHD

Audio:

• SDI: Linear PCM 48 kHz, 12 channels, 24 Bit
• HDMI: Linear PCM 48 kHz, 2 or 8 channels, 24 Bit

Data links:

Inputs:

• 2x 12G-SDI, BNC
• 2x 3G-SDI, BNC
• 1x HDMI 2.0, Type A
• 1x Genlock/sync, BNC
• 2x Analogue Audio, symmetric, mic/mic 48 V phantom power/line, Lemo 10-pole (f) (via Breakout cable from 2x XLR 3-pole)
• 1x DC, barrel connector

Outputs:

• 2x 12G-SDI, BNC
• 1x HDMI 2.0, Type A
• 2x Analogue Audio, symmetric, Lemo 10-pole (f) (via Breakout cable from 2x XLR 3-pole)
• 1x Headphones, 3.5 mm stereo jack

Other links:

• 1x LANC, 2.5 mm jack
• 2x Battery mount for NP-F batteries

General product information:

• Dimensions (WxHxD): 21.4 x 12.7 x 4.5 cm
• Weight: 709 g (recorder only)
• Power supply: DC 6.2 - 16.8 V (with NP-F batttery or 12V-3A AC Adaptor)
• Power consumption: 10 - 33 W
• Battery service life: up to 1.5 hours with 5200 mAh battery up to 2.2 hours with 7800 mAh battery

Included in delivery:

• 1x Master Caddy II
• 1x 12V-3A AC power supply unit
• 1x Carry case